Engine is supplied with inflation and deflation.

Designed to be put into service within minutes, and they can be installed on any surface.
Our tents labeled with the colors and corporate logos in the frontal arc.

It features a cover designed especially for organizations dedicated to cover an emergency service, in any event, car accident or disaster, where timely action is needed or emergency.

1. WEIGHT-MEASURES:
Designed for that two-three people can handle it, install it and transport it in a small vehicle, and its total weight between 48 to 150 Kilos.
Tents 3 x 3 x 2 m: 48 Kilos
Tents of 5 x 3 x 3 m: 70 Kilos
Tents 5 x 4 x 3 m: 92 Kilos
Tents 6 x 5 x 3 m: 110 Kilos
Tents 10 x 6 x 3 m: 150 Kilos

From 3 meters to 20 meters long. (Configurable)
From 3 meters to 10 meters wide. (Configurable)
From 2 meters to 4 meters high. (Configurable)

2. TIME FOR YOUR INSTALLATION:
Once downloaded, the time it takes to acquire a status of use is about 8-10 minutes.
The compressor swell the tent, and then fed to the valve will be closed air tight.

3. ATTACHMENT TO FLOOR:
It is designed to be placed within any type of surface, even in those where it is not possible to fix the ground with stakes as beaches, roads, public use road ... etc.

4. INFLATION SYSTEM:
In its very structure incorporates an electric compressor to 220 V low power for inflation and maintenance.

5. ENGINE:
Compressor 220 and about 380 W.

6. FABRIC OF THE 3 POLES:
Polyester-PVC high toughness and a thickness of 0.55 mm and 0.40 mm in Arcos in the rest., With polyvinyl chloride coating on both sides, antipúdrico and UV treatment.

7. LABELING OF SERIES:
Arc label in frontal (above) are usually lyrics (Civil Protection, Red Cross) Etc.
In the right column archway
In the left column archway

8. DESIGN:
Used customer's corporate colors, always using the basic palette of tissue.